60A DC 12V/24V/36V/48V MPPT Solar Charge Controller

Description

1. Software Update MPPT Design. 100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%. Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries’ voltage is more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller.

2. Multiple Battery Adaptation. Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording. Two connectors for each pos and negs on solar and batteries connectors. copper wires:9AWG.

3. Full System Protection. Backlight LCD Display PV voltage/output power/Battery voltage/charging current/working mode/Temperature. ☀ TROUBLESHOOTING function and LCD display can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters.

4. Fan Heat Dissipation. Intelligence Fan-on temperature >45℃ and off < 40℃, Porous heat dissipation. and fan use BEARING technologies increase life UP TO 5000hrs in normal use. Suitable for RVs, Commercial Vehicles, Boats, Yachts, and Solar systems.

5. Notice. If you use sealed lead acid, vented gel battery, etc, you don’t need to set any parameters, the controller can adjust automaticly and work normally; but if you use lithium batteries, you need to properly adjust parameters according to the actual voltage of the battery, because the voltage of lithium batteries is unstable, such as acid battery 12V is 12V, lithium battery 12V may be 11.1V or 14.8V.

Features

1. Charging 3-stage: constant current(MPPT), constant voltage(Absorption Voltage),floating charge.
2. Select-able battery type Vented / Sealed / Gel / NiCd / Lithium battery(default is Sealed)(defined voltage for other battery by user)
3. Soft start time ≤1S, Dynamic response and recovery time 100us
4. Max efficiency ≥98.1%, PV utilization ≥99%
5. In order to reduce the cost of electricity caused by high current, PV and battery each has two terminals
6. MULTIPLE ELECTRONIC PROTECTIONS
7. Short-circuiting
8. Reverse-current
9. Overcharging
10. Overload
11. Over-discharging
12. Reverse polarity protection

Specifications